dB 32
User Guide
Note-
Default Delay time is 3 Sec.
(19) HOTLINE FUNCTION:
To do operate pre-defined any one Hotline function (1/2/3)
(20) CONFERENCE
(THREE PARTIES)
:
You can have a conference between yourself and other two parties (either extn. or Jn.).
To initiate a conference, proceed as follows with different options –
1) All three intercom,
2) Two intercom& one JN call,
3) Two JN call & one intercom
When the master extension which had originated conference goes On-Hook, conference will be terminated.
NOTE:
While adding extensions/ junction., you may get
A) Busy Tone
– Dial
Flash + 2
and re-start the process.
B) Error Tone
– Dial
Flash + 2
and re-start the process.
C) No-Reply
–Dial
Flash + 2
and re-start the process.
(21) DAY/NIGHT/LUNCH MODE:
To set for Lunch / day / night / auto , landing modes for incoming call
Or
3
Dial 16 + 2 + XX (Junction No.) + Y (Delay Time)
Confirmation Tone
XX= L1 =01,L2 = 02….., Y= 1 to 9 sec
Or
4
Dial 16 + 3 + XX (Extension No.) + Y (Delay Time)
Confirmation Tone
XX= 201,202,203….., Y= 1 to 9 sec
Step
Procedure
Tones
Abbreviations
1
Lift hand set
Internal Dial Tone
2
Wait for automatic dial as program function (1/2/3)
Ring back Tone
3
Start conversation when set caller reply
4
Hang up, when after conversation
Cancellation of Hotline
Lift handset& Dial 160,Get confirmation tone
Step
Procedure
Tones
Abbreviations
1
In speech with Extn / Jn
2
Press Flash Key, to put Extension / Jn. On hold
Music tone to held
extension/Jn
3
Dial 2
nd
Extension / Jn number
4
When extension answer’s,
Press
Flash Key & Dial “ 0 “
5
Three party conference is established
6
Hang up, when conversation is over
Step
Procedure
Tones
Abbreviations
1
Lift handset
Internal Dial Tone
2
Dial
self password (xxxx)
Default XXXX is 1111
3
Dial 85 + 0 / 1 / 2 for Manual Mode
Confirmation tone
0= Lunch, 1= day & 2= night mode
OR
Dial 85 + 3 for Automatic Mode
Confirmation tone
3= Automatic mode
Decibel 32
Page
!
8
