Crystal Vision
Remote control
via Ethernet
Configuration/Labels
This page enables the user to add an alphanumeric label to the wallbox and to every slot.
VisionWeb ‘Configuration/Labels’ page
In the example above, slots 1.01 and 1.02 have been labelled, as has the frame itself. Note
that the Configuration/Labels page shows 28 slots which is to provide slots for ‘virtual cards’.
A virtual card is one made up of controls from several cards in a frame and allocated a unique
slot number. Once the labels have been created they are displayed on the ‘Home’ page:
VisionWeb ‘Home’ page showing labelled slots and wallbox.
Configuration/Network
From the Setup home page, clicking on the Network link will bring up the Network Setup
page. If the installation includes more than one Wallbox Q-Down then the IP address will
need changing as all Wallbox Q-Downs need a unique IP address. Enter the new IP address
in the
‘Primary
IP address’
edit box and click on ‘Set’. In the example below, the IP address
will be changed to 10.0.0.203 from its default value.
The ‘
Primary
N
etmask’
address can also be changed on this page if required. The Gateway
IP address should be set to 0.0.0.0 in the
Gateway IP address
box unless a router is in
circuit, in which case the correct gateway address should be entered. Click on ‘Reboot’ to
implement the changes and the web page should refresh itself showing the updated
parameters.
Wallbox Q-Down User Manual R1.0
19
08 August 2016
