Crystal Vision
Introduction
AVDELAY 3G User Manual R1.11
3
09/08/2016
1 Introduction
The AVDELAY 3G is an audio/video delay that has been designed for correcting large lip-
sync errors on incoming 3Gb/s, HD or SD signals containing up to four groups of embedded
audio and has the ability to change the relative audio/video timing by several seconds in either
direction.
Ideal for any environment that uses High Definition with embedded audio, AVDELAY 3G is
extremely straightforward to operate. It uses the intuitive Crystal Vision board edge interface
which, using two select buttons, a shaft encoder and a display, allows you to instinctively and
quickly locate any option from menus structured in the most logical way possible. Control can
additionally be from an active front panel on the frame, a remote panel, the Statesman PC
software or remotely via SNMP.
AVDELAY 3G fits in the standard frames (available in 4U, 2U, 1U and desk top box) and is
used with the RM62 rear module to access all the inputs and outputs.
With the addition of the FIP optical input or FOP optical output, cable length will no longer be
an issue when sending and receiving signals from beyond the local signal bay. The RM62 is
configured for fibre connectivity.
AVDELAY 3G is a space-saving 100mm x 266mm module which fits in the standard Crystal
Vision frames.
