Crystal Vision
Card edge operation
AVDELAY 3G User Manual R1.11
20
09/08/2016
Group 4 delay
select
Press ENTER and rotate SCROLL/ADJ
Channel 1 delay
group select
Rotate the
SCROLL/ADJ
. control to show the Group 4 Ch1 control.
Press ENTER and rotate SCROLL/ADJ. to select.
1, 2, 3, 4, By.
Channel 2 delay
group select
Rotate the
SCROLL/ADJ
. control to show the Group 4 Ch2 control.
Press ENTER and rotate SCROLL/ADJ. to select.
1, 2, 3, 4, By
Channel 3 delay
group select
Rotate the
SCROLL/ADJ
. control to show the Group 4 Ch3 control.
Press ENTER and rotate SCROLL/ADJ. to select.
1, 2, 3, 4, By
Channel 4 delay
group select
Rotate the
SCROLL/ADJ
. control to show the Group 4 Ch4 control.
Press ENTER and rotate SCROLL/ADJ. to select.
1, 2, 3, 4, By
Delay 1
Press ENTER and rotate SCROLL/ADJ
Delay 1 time in
milliseconds
Rotate the
SCROLL/ADJ
. control to show the Delay 1 millisecond
control.
Press ENTER and rotate SCROLL/ADJ. to select.
0-40 ms
Delay 1 time in
frames
Rotate the
SCROLL/ADJ
. control to show the Delay 1 frame control.
Press ENTER and rotate SCROLL/ADJ. to select.
0-30 frames
Delay 1 time in
seconds
Rotate the
SCROLL/ADJ
. control to show the Delay 1 second control.
Press ENTER and rotate SCROLL/ADJ. to select.
0-10 sec
Delay 4
Press ENTER and rotate SCROLL/ADJ
Delay 4 time in
milliseconds
Rotate the
SCROLL/ADJ
. control to show the Delay 1 millisecond
control.
Press ENTER and rotate SCROLL/ADJ. to select.
0-40 ms
Delay 4 time in
frames
Rotate the
SCROLL/ADJ
. control to show the Delay 1 frame control.
Press ENTER and rotate SCROLL/ADJ. to select.
0-30 frames
Delay 4 time in
seconds
Rotate the
SCROLL/ADJ
. control to show the Delay 1 second control.
Press ENTER and rotate SCROLL/ADJ. to select.
0-10 sec
Audio controls
Any number of audio channels can be assigned to any of the four audio delays either
separately or if desired all sixteen channels to a single delay. All four delays have their own
delay controls giving the maximum flexibility when adjusting the audio and video sync.
Note:
Both channels of a Dolby E signal must be assigned to the same delay.
