Crystal Vision
Using the front control panel
AVDELAY 3G User Manual R1.11
28
09/08/2016
The Status menu
From the STATUS top menu press F1 then SCROLL/ADJ to access the three status sub menu
options. These options are; General Status, Input Groups present and DeEmbedded Audio
silence. To enter a sub menu once selected press F1, then use the SCROLL/ADJ/ADJ control
to traverse the sub menu.
Note:
No changes can be made from this read only menu. Not all status information will be updated
in real time. If necessary press the * button to cause the display to update.
Menu
Description
General Status
Rotate the shaft control and press F1.
Input present
Rotate the shaft control to view the Input video standard is shown.
Ip 1080p50/59/60, Ip 1080i50/59/60, Ip720p50/59/60, Ip 525, Ip
625, IP Missing, IP Not Supported.
GPO 6 status
Rotate the shaft control to view the GPO 6 status.
On, Off.
Board software
Rotate the shaft control to view currently installed software version
Serial number
Rotate the shaft control to view the electronically stored PCB serial
number
IP address
Rotate the shaft control to view the AV DELAY 3G IP address.
Note:
the Ethernet connection is available on-board and is only used
when updating the board software.
Input Groups
Rotate the shaft control and press F1.
Input Group 1
audio
Rotate the shaft control to view the input audio group 1 status
Present, Missing.
Input Group 2
audio
Rotate the shaft control to view the input audio group 2 status
Present, Missing.
Input Group 3
audio
Rotate the shaft control to view the input audio group 3 status
Present, Missing.
Input Group 4
audio
Rotate the shaft control to view the input audio group 4 status
Present, Missing.
De-embedder
audio silence
Rotate the shaft control and press F1.
De-embedder
Group 1 audio
channel silence
Rotate the shaft control to view de-embedder group 1 channel status.
1234
=channel not silent,
s=
silent,
m
=missing,
dd
= Dolby E present.
De-embedder
Group 2 audio
channel silence
Rotate the shaft control to view de-embedder group 2 channel status.
1234
=channel not silent,
s=
silen
t
,
m
=missing,
dd
= Dolby E present.
De-embedder
Group 3 audio
channel silence
Rotate the shaft control to view de-embedder group 3 channel status.
1234
=channel not silent,
s=
silent,
m
=missing,
dd
= Dolby E present.
De-embedder
Group 4 audio
channel silence
Rotate the shaft control to view de-embedder group 4 channel status.
1234
=channel not silent,
s=
silent,
m
=missing,
dd
= Dolby E present.
