Crystal Vision
Introduction
3
26/02/2007
1 Introduction
ENDAC is a 12-bit broadcast encoder with four outputs that can be configured to give a
variety of component and composite signals.
ENDAC will fully integrate with any other interface or keying product from the Crystal
Vision range. Further flexibility is afforded by the large choice of control options. Control
options include board edge control, local or remote active control panel and the Statesman
PC Control System.
•
12-bit digital encoder
•
Flexible control, including PC software.
•
Three link configurable outputs, 1 fixed composite output
•
Compact design for high packing density
ENDAC 12-bit Encoder
ENDAC is a 100mm x 266mm module that fits in Crystal Vision four standard frame
sizes. 24 modules fit in 4U, 12 modules fit in 2U, six in 1U or two in a desktop box. There
are a range of rear connector modules available for the ENDAC which allow the system
builder great flexibility in frame configuration.
12-bit
digital
encoder
and
D to A
Output
configure
Y, G or composite
C, U, B or composite
V, R or composite
Composite
Reclocked
SDI Output
Reclocker
and
cable
equilizer
SDI Input
