Crystal Vision
Card-edge
control
12
26/02/2007
Adding NTSC setup (pedestal)
When the NTSC standard is selected the analogue output can have a 7.5% IRE setup
(pedestal) applied. The Chroma amplitude is also adjusted accordingly.
DIL 3
Function
UP M
+7.5% IRE setup added
DOWN J
No setup
Betacam format
The ENDAC is able to output in Betacam Y’P’bP’r format where the P’bP’r component is
attenuated by 1.333.
DIL 4
Function
UP
Normal
DOWN
β
Sets YUV gains to output Betacam video Chroma amplitudes
Control
Control can be from card-edge or remotely from an active control panel or Statesman PC
control package.
DIL 7
Control
UP
loc
Local, board-edge control available
DOWN
rem
Remote control selected. Board edge control are non-functional
Note. M/J and BETA modes will interact globally with composite and component
outputs.
