QTY
Description
Part Number
Usage
1
3/8 Tube x 9/26-24 Female Adapter
PSEI6012U9
Quick connect fitting adaptor to an anglestop
1
1/2” Tube to 3/4” NPT
PSEI02026
Adaptor reducers for filter system inlet and outlet
1
5/8” (1/2”) Stem to 3/8” tube
PP062012W
Adaptor reducers for filter system inlet and outlet
3
JG 90 elbow 3/8” smooth to 3/8”
PP221212W
For trunkline outlet of unit and water inlet
2
JG 3/8” mpt to 3/8” push-in
PP011223W
For CR-14FC Water filter head, inlet and outlet
1
JG 3/8” to 3/8” union
PP0412W
Water inlet fitting. Union fitting from hose to tube
2
JG 1/2” mpt to 3/8”
PI451214FS
For Shurflo Water Reg. inlet and outlet
10
JG 3/8 Locking Clips
PIC1812R
Collet locking clip for JG fittings
1
50 PSI Water Pressure Reducing
Valve (WPRV)
183-150-NF
Install after water filter system to regulate pressure feeding
unit to 50 PSI
1
12’ Section of 3/8” OD tubing
PE-12-EI
Water inlet tubing, filter system to chiller
Crysalli Beverage Systems
a division of WPD
1739 Sabre Street, Hayward, CA 94545
www.crysalli.com
510.732.0100
CR-KIT-CPCT Install Kit
Ordered Separately
Install Kit for CP2000-CT2, CT3 or
PB Countertop Chiller Systems
This Kit is designed to supply you with the fittings & parts
you may need to complete the install of our Everpure CR-
14FC Filter system to a Crysalli Countertop CP2000-CT2
with 3/8 John Guest Water Inlet Fitting.
Always reference local plumbing codes to determine if
a backflow preventer is required and to check the type/
style of backflow preventer that is accepted as well as the
plumbing location it needs to be placed in.
Crysalli does not include backflow preventers in the install
kits because of variability in requirements.
Backflow devices should be sourced from local plumbing
stores.
For questions or assistance with install contact Crysalli 510-
732-0100 or your local Distributor.
Gate valve or
angle stop
Use JG 3/8” mpt
fittings on filter
head inlet & outlet
3/8” OD Hose
Water pressure reducing valve
with 3/8” JG fitting for 3/8” OD
hose hookup
1/4” braided water hose with 3/8”
smooth end male JG to hook up to
water pressure reducing valve
1/4” CO2 line
Clear hose is the
overflow drain hose
Tighten PI451214FS 1/2” to 3/8” JG fitting to inlet
and outlet of water pressure reducing valve
Optional accessory avaliable: CR-LD38JG Inline Leak Detector and Auto Water Shutoff.
Leak Block
Detector
