Crysalli Beverage Systems
a division of WPD
1739 Sabre Street, Hayward, CA 94545
www.crysalli.com
510.732.0100
CO2 Information
CO2 tanks can be sourced and
refilled from local beverage CO2
companies (both bulk and/or tank)
and welding supply companies.
On average, 1lb of CO2 will
be used for every 5 gallons of
sparkling water. A 20lb tank should
carbonate 100 gallons (12,800oz or
378 liters) of sparkling water.
WARNING:
CO2 can be dangerous. CO2 cylinders contain high pressure
gas which can be hazardous if not handled properly. Follow all CO2
regulator instructors (found with CO2 regulator) and other handling
instructions from the CO2 tank supplier.
CR-PC160 High
Pressure CO2
Regulator 0-160 PSI
Attaches to 5-100lb CO2 tanks. Set at 75 PSI as a starting point.
Note
: Low-pressure beer regulators 0-60 PSI will not work properly
with Crysalli.
Fill level gauge: Volume of CO2 in
tank. Tank is empty when needle is
in the red zone or zero.
1/4” Male flare connection to
Crysalli chiller. Use nylon washer
supplied with regulator in fitting.
Output pressure gauge: Shows CO2
output pressure settig.
Set to 75 PSI.
Threaded connection
to CO2 tank.
Pressure adjustment screw and
locking nut.
