URC-601 User Manual/
Εγχειρίδιο
Χρήσης
8
2.2 Programming Control for DVB-T Devices
You can program the URC-601 remote, to control your DVB-T in the following ways:
2.2.1 Programming CRYPTO DVB-T
1. Turn on your Crypto DVB-T you want to program to
work with the URC-601 remote control. Hold the remote
in a straight line in front of your device at a distance less
than 1 meter.
2. Press and hold down the remote device mode
button
for about 3 seconds until the red light
indicator lights up constantly.
3. Enter the four digit code that you found in the Crypto
DVB-T code list (Appendix B).
Note:
•
If no key is pressed within 30 seconds from the
moment the red light of the button
turns on, or
another key other than number has been pressed,
the button
will turn off and the programming
process will be canceled.
•
For all Crypto DVB-T's the button on the URC-
601 remote control, will control the volume of your
TV.
With this, you can control the sound of your TV without
having to switch from DVB-T mode to TV mode.
Actions to verify correct programming
Once you have programmed the remote with the correct code, using the above
method, check to see if all the buttons are working according with the functions of your
Crypto DVB-T.
2.2.2 Programming other DVB-T
To program the remote, to control other DVB-T devices you must use the Learn
function feature that is described in chapter 3.
Note:
If you want to program another DVB-T device , and you want to control the
sound of your TV by using the
button like Crypto’s DVB-T, use the LEARN method
and program the button
using the remote control of your TV and learn the buttons
that change the sound of your TV
.
With this, you can control the sound of your TV
without having to switch from DVB-T mode to TV mode.
