URC-601 User Manual/
Εγχειρίδιο
Χρήσης
6
2.1.4 Brand code search programming
1. Turn on your TV you want to program
to work with the Crypto URC-601 remote
control. Hold the remote in a straight line
in front of your TV at a distance less than
1 meter.
2. Press and hold down at the same time
the
button and the number from 0 to
9 that corresponds to the brand of the TV
according to the brand search list in
Appendix A
3. After 2 seconds the
button will
start blinking
4. When your TV turns off release both
buttons so that the remote stores the
code.
Attention:
When the TV turns off you
must immediately release both buttons so
to avoid the remote to go on the next
code.
Note:
This search can be finished without finding an appropriate code for your TV.In that
case the
button will stop blinking and your TV will remain on.
Actions to verify correct programming
Once you have stored on the remote the correct code, check to see if most of the
buttons are working according to the functions of your TV.
Corrective Actions
If any of the buttons do not work properly, you can program those buttons individually
by using the learning function process described in chapter 3.
