URC-601 User Manual/
Εγχειρίδιο
Χρήσης
7
2.1.5 Flash code search programming
This feature can only be used for TV, SAT and STB devices.
1. Turn on your TV you want to program to work
with the Crypto URC-601 remote control. Hold the
remote in a straight line in front of your TV at a
distance less than 1 meter.
2. Press and hold the mute
button. After 3
seconds the
button will start blink quickly
4. When the TV change channel release the mute
button. The
button will start blink slower.
4. When the TV changes channel again press the
button to store the code
Attention:
When the TV changes channel for the
second time, press the
button immediately to
avoid the remote to go to the next code.
Note:
This search can be finished without finding an
appropriate code for your TV.In that case the
button will stop blinking and your TV will remain
on.
Actions to verify correct programming
Once you have stored on the remote the correct code, check to see if most of the
buttons are working according to the functions of your TV.
Corrective Actions
If any of the buttons do not work properly, you can program those buttons individually
by using the learning function process described in chapter 3.
