Cruzbike Sofrider v2 Assembly Instructions - 3/1/2011
Cruzbike Sofrider v2 Assembly page 9 of 11
Step 8:
Install front and rear reflectors, mirror, pedals,
and head tube badge
The red reflector mounts on the seatpost (fig.
30). The white one mounts on the handlebar:
fig. 30
Install mirror: use a utility knife and cut out the
end of the rubber grip on the left (or the right if
you prefer). (fig. 31-32):
fig. 31
fig. 32
The pedals are marked ‘L’ and ‘R”. The left
pedal is reverse threaded, so turn it counter-
clockwise to tighten:
fig. 33
Be sure to proudly “peel & stick” your
CRUZBIKE badge on the front and center of
your head tube!
fig. 34
Å
Mirror: (fig 32) a good mirror is an
important accessory on ANY recumbent. We
recommend you use the Mountain Mirrycle
mirror or other high quality mirror.
