Chrysler
2011 - 2015 300
Dodge
2011 - 2015 Charger
2011 - 2015 Journey*
Notes:
*Dodge Journey requires different
camera (not included in kit), available
upon customer request.
Important Note: Not compatible in
vehicles with Manual Transmission.
IMPORTANT:
Compatible Radio Type:
U-CONNECT 8.4” SCREEN
RVCCH-75EC
REAR-VIEW INTEGRATION FOR CHRYSLER & DODGE VEHICLES 2011-2015 w/ 2-PIECE RA
DIO
Rev. 032015
U-CONNECT 8.4” SCREEN
(2-PIECE RADIO)
Step 4
. Clean and clear the hole for the camera to be inserted.
Step 5
. Insert the cables and camera through the drilled hole but DO NOT
FULLY INSERT, this will allow you to rotate and camera and position it when
testing the camera view from the 4.3” display in the car.
Step 6
. Route your power and RCA cable towards the front of the vehicle
See installation video on our website!
Step 1
. After you have removed the 3rd brake light from the trunk lid, use
the supplied drilling template to begin drilling the hole on the back side of the
brake light.
Step 2
. Continue drilling through the back and into the front side of that
brake light. This will allow you a guide hole when you begin drilling on the
front side.
Step 3
. Turn over the brake light and continue clearing the hole on the
front side of the brake light. Be very careful when drilling, take your time and
cleanly drill.
HOW TO DRILL THE WHOLE:
USING THE NON-CAMERA THIRD BRAKE LIGHT
