![background image](http://html1.mh-extra.com/html/crux/my22/my22_user-manual_2691639017.webp)
14
WARNING! Do not apply grease to the contact surfaces between the seatpost
and the seat tube. Grease reduces the friction, which is critical to proper
seatpost grip. Specialized recommends the application of carbon assembly
compound (fiber paste), which can increase friction between carbon surfaces.
Please visit your Specialized Authorized Retailer for additional information.
WARNING! Failure to follow the seatpost and frame insertion requirements
(fig. 3) may result in damage to the frame and/or seatpost, which could
cause you to lose control and fall.
WARNING! For general instructions regarding the installation of the seatpost,
refer to the appropriate section in the Owner’s Manual. Riding with an
improperly tightened seatpost can allow the saddle and seatpost to slide down,
which can damage the frame and cause you to lose control and fall.
MIN
INS
ERT
ION
3
FRAME MINIMUM
INSERTION:
75 mm FROM TOP OF
COLLAR
SEATPOST
MINIMUM
INSERTION
Fig. 3
Both the frame and seatpost have minimum insertion requirements. Additionally, the frame
has a maximum insertion limit to prevent damage to the tire cutout area.
MINIMUM INSERTION:
The seatpost must be inserted into the frame deep enough so the
minimum insertion/maximum extension (min/max) mark on the seatpost is not visible. The
frame requires a minimum of 75 mm of insertion.
If the post is at the minimum and the saddle is not at the desired position, the seatpost must be
replaced with a longer or shorter seatpost.
Once the saddle height is determined, torque the seat collar bolt (as seen in fig. 2) to 55
in-lbf / 6.2 Nm.
Summary of Contents for MY22
Page 1: ...USER MANUAL ENGLISH ...
Page 2: ......
Page 14: ...11 1 CHURRO Foam sleeve S179900013 S179900013 5 4 DISC BRAKES ...