![background image](http://html1.mh-extra.com/html/crux/my22/my22_user-manual_2691639015.webp)
12
5 . 3 . D I S C B R A K E S
FIG. 1
ROUTE THE REAR BRAKE HOUSING:
Run the rear brake housing in through the chainstay ICR port, over the bottom bracket
shell, up the down tube.
Install a churro (foam sleeve) over the brake housing and into the down tube.
Route the brake housing out the head tube ICR port.
Install a grommet over the brake housing and into the head tube ICR port.
Install the caliper on the chainstay.
Complete the rear brake installation according to the brake manufacturer’s instructions.
ROUTE THE FRONT BRAKE HOUSING:
Run the front brake housing in through the lower ICR port in the fork and guide it up the
fork leg until it exits at the ICR port on the fork crown.
Install a grommet over the brake housing and into the upper fork ICR port.
Complete the front brake installation according to the brake manufacturer’s instructions.
6. SEATPOST ASSEMBLY
INFO: Most CruX models come with the Terra seatpost (1b).
1a
ITEM
DESCRIPTION
A
M6 BOLT
B
M6 CRADLE WASHER
C
M6 BARREL NUT
D
M5 BOLT
E
M5 CRADLE WASHER
F
M5 NUT
E
B
A
D
F
C
FIG. 1a - ALPINIST SEATPOST
Grease then install the M6 barrel nut (C) inside the seatpost.
Grease and assemble the M6 bolt (A) and M6 cradle washer (B), then install them in the upper
cradle.
Using a 5 mm Hex key, torque the M6 bolt (A) to 26.5 in-lbf / 3 Nm.
Install the lower cradle, followed by the saddle (with greased rails) and upper cradle assembly.
Grease and assemble the M5 bolt (D) and M5 cradle washer (E), then install the bolt and
spacer through the seatpost bolt hole and through the lower cradle.
Grease then install the M5 nut (F) onto the M5 bolt (D).
Adjust the saddle fore-aft position, then adjust the angle of the saddle by turning the M6 bolt
(A).
With a 4 mm Hex key, torque the M5 bolt (D) to 55 in-lbf / 6.2 Nm, then check the saddle
angle. If the angle still needs to be adjusted, loosen the M5 bolt (D), loosen or tighten the M6
bolt (A) accordingly, then torque the M5 bolt again. Repeat until the saddle is at the desired
angle.
Summary of Contents for MY22
Page 1: ...USER MANUAL ENGLISH ...
Page 2: ......
Page 14: ...11 1 CHURRO Foam sleeve S179900013 S179900013 5 4 DISC BRAKES ...