Installation Example on a Chrysler 300C
1. Remove the front panel from the center console, which is
attached by multiple clips.
2. Remove the 4 TORX screws and pull the headunit out of the
dashboard.
3. Remove the gray 22-pin male connector from the back
of the headunit and plug it to gray 22-pin female connector
on the MG-3 T-harness . Connect the gray 22-pin male
connector of the MG-3 T-harness to the
factory radio harness.
4. Remove the white 22-pin male connector from the back
of the headunit and plug it to white 22-pin female connector
on the MG-3 T-harness . Connect the white 22-pin male
connector of the MG-3 T-harness to the
factory radio harness.
Rev.032317
3 / 4
