SWITCHING SOURCE INPUTS
1. Press
RADIO/MEDIA
button;
2. Tap
VES
on the screen;
3. Tap
AUX IN 1
to select the interface as current AV-source.
NOTE:
The VES button is only active after the interface is installed.
Note:
The interface switches automatically to an installed rear-view camera when reverse gear
is engaged.
Activation of rear-view camera
The rear-view camera activate automatically whenever the reverse gear is engaged.
Activation of the video-in-motion function
The video-in-motion can be activated and deactivated by DIP 1 or alternatively by the included loose
green cable in connection with a toggle switch (not included).
Video-in-motion permanent
Set DIP 1 to ON for the video-in-motion function to be activated permanently without disrupting the
navigation performance.
Video-in-motion selective
Set DIP# 1 to OFF and use the green wire to activate the video-in-motion function.
Connect a toggle switch between a +12V ACC source and the green wire.
●
+12V = Video in Motion is activated
●
0V = Video in Motion is not activated
HDD
DISC
AUX
VES
Rev.032317
4 / 4
