11
6. To change or remove filter basket, line the notch in the filter holder with the indicator on
the 1 or 2 cup filter basket. (See Figure 4.) Pull basket up and out of the filter holder.
7. Use the measuring spoon to measure ground espresso coffee and add to the filter basket.
(See Figure 5.) Use the flat side of the measuring spoon to gently tamp the coffee and
pack it. Wipe any loose coffee grounds from the rim of the filter holder to assure a proper
fit into the Espresso Maker.
FOR BEST RESULTS:
Use freshly ground MEDIUM to FINE (espresso) coffee.
8. Place the filter holder underneath the brew head so that the filter holder handle is aligned
with
▲
(See Figure 6.)
9. Turn handle to the right until the filter holder handle is facing front and lined up with the
LOCK (
) and it is securely locked. (See Figure 7.)
10. Place 1 or 2 espresso cups under the 2-spout brewing head.
11. Press the ON/OFF button to ON. The red HEATING indicator light will illuminate.
12. Make sure the ESPRESSO/STEAM button is in the highest ESPRESSO position ( ).
13. After approximately 2 minutes, the white READY light will illuminate. Turn the control
dial to the Espresso position ( ) and 2 spouts of espresso will begin to flow into
the cup or cups
HEATING
READY
HEATING
READY
Fig. 6
Fig. 7
SZ-314289_CRUX006_15 bar Espresso maker_IM_R3.indd 11
2017-05-17 5:02 PM
