7. CONNECTING CONTROL ACCESSORIES
There are three additional Jack sockets on the back of the Mojo 61 that are used to
connect pedals or the “half-moon” 3-way switch.
9.
Half-Moon or Foot Switch input socket. Here you can connect our dual foot
switch or our half-moon switch; the latter can only be attached to the optional
lower manual keyboard, and is activated by pushing buttons n. 3 and n. 4
together. Normally, this socket accepts the dual foot switch that works
concurrently with the panel buttons n. 3 and n. 4.
Please make sure to use a foot
switch specifically made for the Mojo 61.
10. Connect a 10-K ohm expression pedal to this jack; our Crumar long-throw pedal
is the perfect choice, but other third party pedals might be compatible as well.
11. Connect a traditional sustain pedal to this jack; the polarity is automatically
detected when the instrument is powered on, so please make sure that the
pedal is already connected before powering on.
ABOUT THE SUSTAIN PEDAL
The sustain pedal is normally used when the Electric Piano sound is active and
functions as a normal piano sustain pedal. However, when VB3 is active and the
Rotary Speaker effect is on, the sustain pedal can be used to switch between SLOW
and FAST speeds; when the speed is set to STOP by using button n. 3, the sustain
pedal can be used to deactivate the rotary brake and return to the previous speed.
8. HOW TO TURN THE MOJO 61 ON
You should have been given an external PSU (Power Supply Unit),
one end goes to the power outlet, the other end goes to the power
socket on the back of your Mojo, labeled with number 12.
Push the switch n. 13, after a second you will see all the lights
illuminating the control panel, and after 8 more seconds the
instrument is ready to be played.
CRUMAR MOJO 61 USER'S MANUAL - Page 12/28
Fig. 6 - Pedal inputs.
Fig. 7 – Power section.
