CRS SAM4s ER-180U Series Operator'S And Programming Manual Download Page 18

Page: 18 / 93

•

Getting Started

SAM4s ER-180U Operator's & Programming Manual v1.0

Initial Clear

CAUTION: Do not share this information with unauthorized users.

The initial clear function allows you to exit any register activity and return to a beginning or
cleared state. Any transaction that is in progress will be exited and totals for that
transaction will not be updated.

Here are some reasons you may want to perform an initial clear:

•

The register is in an unknown state, and you wish to exit the current program or
transaction without following normal procedures.

•

An initial clear may be necessary as part of servicing, or troubleshooting.

To Perform an Initial Clear:

Unplug the ECR.

Press and hold the key position where the

SUBTOTAL

key is located on the

default keyboard layout.

Continue to hold the

SUBTOTAL

key and plug the ECR into a power source.

The message “****** INITIAL CLEAR ******” prints when the initial
clear is complete.

This procedure will not affect register programming, or clear previously stored totals in ECR
memory.

Summary of Contents for SAM4s ER-180U Series






























































































Search results

Summary of Contents for SAM4s ER-180U Series

Reviews:

Related manuals for SAM4s ER-180U Series

Brands by name

Popular brands

CRS SAM4s ER-180U Series, Operator'S And Programming Manual

Search results

Summary of Contents for SAM4s ER-180U Series

Reviews:

Related manuals for SAM4s ER-180U Series

Brands by name

Popular brands