Systems and Components
4-1
Owner’s/Operator’s Manual
Your CROWNLINE may have more or fewer systems and components than those
covered in this section based on how your CROWNLINE was built. Some systems
and components may not be offered on all models. Use this section as reference. If
you have any questions regarding the systems and components, contact your
CROWNLINE dealer.
This section discusses the system and components of your CROWNLINE. It
describes the basic operating characteristics for efficient use of the systems and
components and to prevent damage. Make sure you read and understand all
information provided before operating these systems.
IMPORTANT:
CROWNLINE Boats, Inc. reserves the right to change, alter and
modify its finished boats, parts, specifications and prices at any
time without notice.
Know the systems and functions of the controls and indicators on your craft. It is very
important for safe and proper operation. When replacement parts are required, use
marine grade parts with equivalent characteristics, including type, strength and
material. Marine grade parts are designed specifically for the conditions and
environment they are exposed to. Using substandard parts could result in serious
injury and/or product failure.
Irregular inspection and maintenance of sysems can lead to death,
serious injury or product damage. Inspect and maintain all
systems to prevent unexpected hazards associated with worn or
faulty components.
IMPORTANT:
Before making any changes to the systems or components on your
boat, refer to the applicable U.S. Coast Guard, American Boat and
Yacht Council or ISO Standards. See your dealer for additional
information.
FUEL SYSTEM
The fuel system consists of a built-in fuel tank, a fuel fill and a fuel tank vent. The
internal fuel system on-board your CROWNLINE is designed to meet or exceed
federal requirements, at the time of manufacture, of the U.S. Coast Guard, the
American Boat and Yacht Council and ISO standards.
The fuel system has been factory-inspected and pressure-tested in accordance with
regulations in effect at time of manufacture. In addition, each fuel tank must pass
rigid tests and inspections performed by the fuel tank manufacturer.
Prior to taking delivery of your CROWNLINE, it is important a full inspection be made
of the entire fuel system by your CROWNLINE dealer.
Crownline_OM_sec4:Crownline OM 11/10/2006 3:17 PM Page 4-1