Crown CT4QP Series, Installation And Operation Manual

Page: 4 / 26

PUMP SPECIFICATION:
Suction/Discharge:
4" (102mm) x 4" (102mm) 125lb. Flange.
Solid Capacity: 3" (76.2mm) Dia. Spherical
Liquid Temperature: 160°F (71°C) Continuous.
Volute/WearPlate: Cast Iron ASTM A-48, Class 30,
Replaceable, External Clearance
Adjustment.
Case: Cast Iron ASTM A-48, Class 30.
End Cover: Cast Iron ASTM A-48, Class 30.
Full Diameter, Removable.
Seal Plate: Alloy Steel; Replaceable
Pedestal: Cast Iron ASTM A-48, Class 30.
Impeller: Design: Two Vane, Open.
Material: Ductile Iron ASTM A-395.
Dynamically Balanced, ISO G6.3.
Shaft: High Carbon Steel
Shaft Sleeve: 316 Stainless Steel
Square Rings: Buna-N
Hardware: Corrosion Resistant Steel
Paint: Air Dry Enamel.
Seal: Design: Single Mechanical
Lubrication: Grease, with Self-Feeding Lubricator.
Material: Rotating Face - Carbon
Stationary Face - Ceramic
Elastomer - Buna-N
Hardware - 300 Series Stainless
Bearing-pump End:
Design: Double Row, Ball
Lubrication: Oil
Load: Radial & Thrust
Bearing-drive End:
Design: Single Row, Ball
Lubrication: Oil
Load: Radial & Thrust
Check Valve:
Material: Elbow-Cast Iron ASTM A-48,Class 30
Valve Flap-Neoprene.
Weight-Cast Iron ASTM A-48,Class 30
ENGINE SPECIFICATIONS:
Model:
John Deere 3015D
Type: Three Cylinder, Four Cycle,
Water Cooled, Diesel
Displacement: 87 Cu. In. (1.4 L)
Governor: Mechanical
Lubrication: Pressure Feed
Air Cleaner: Filter Element
Oil Reservoir: 7.7 U.S. Qts. (7.2 L) Dry.
6.5 U.S. Qts. (6.1 L) Refill.
Operating Time: 24 Hours
Starter: 12 Volt Electric
Features: Safety Shut down switches for low
oil pressure, High temperature, & V-Belt failure. Instrument panel with
temperature & oil pressure gauge, ampmeter, hourmeter &
tachometer, muffler with rain cap and battery.
TRAILER SPECIFICATION:
Heavy duty fabricated steel frame, integral fuel tank 60 U.S. Gallons
(227.1 L), with fuel guage, Lockable fuel filler cap, Suspension - 6000
Lb single torsion-flex axle, Lifting bail, Adjustable front leveling jack,
Adjustable towing hitch with safety chains, Lockable battery rack,
7.00 x 15" LT load range "C" tires & wheels,
and four 2" clean-out/drain plugs.
PRIMING SYSTEM:
Air Separation Chamber:
Separates air & water at the top of the
pump case.
Air Eductor Assy: Vacuum jet eductor designed with a
non-corrosive bronze body with internal
AISI 316 stainless steel jet eductor.
Contains no moving parts.
Discharge Valve: Non-return check valve that forms a
90° flanged discharge fitting. Steel
construction with weighted reinforced
neoprene seat.
Air Compressor: Cast Iron Class 30, Twin cylinder,
Air Cooled, Oil lubricated.
SECTION: A- PUMP SPECIFICATIONS - 4"
inches
(mm)
4