Crown CT42029, Original Instructions Manual

Page: 3 / 33

English
3 English
4
Grounding Instructions
This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path
of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped
with a cord having an equipment-grounding conductor and grounding plug. The plug must be inserted
into an appropriate outlet that is properly installed.
Items supplied:
1
、
Handle
2
、
ON/OFF switch
3
、
Top section
4
、
Filter basket
5
、
Safety float valve
6
、
Clasp
7
、
Container
8
、
Vacuum hose connection
9
、
Idler wheel
10
、
Flexible vacuum hose
11
、
Vacuum tube
12
、
air inlet
13
、
Large vacuum nozzle
14
、
Dust bag
15
、
turn on the water pipe
16
、
Crevice nozzle
17
、
Socket outlet
Motor
Be sure your power supply agrees with the nameplate marking.
Only connect to a proper 220-240 volt, 50Hz socket, Minimum fuse protection 13A.
Voltage decrease of more than 10% will cause loss of power and overheating. Manufacturer’s tools
are factory tested; if this tool does not operate, check power supply.
Max. load of socket-out: 2000W.
NOTICE
: DO NOT operate this tool on D.C. current. Tool damage may occur.
CT42029: 80L 1000W*2
CT42030: 80L 1000W*3
CT42031: 100L 1000*3
Overview of nozzles
This appliance is for use on a nominal 220-volt circuit and has a grounding
attachment plug that looks like the plug illustrated in Figure A. Make sure
that the appliance is connected to an outlet having the same configuration
as the plug. No adaptor should be used with this appliance.
CAUTION : R i s k o f f i r e a n d i n j u r y. d o n o t e x c e e d 1 3
amps
. t h e r e c e p t a c l e i s e n e r g i z e d
w h e n t h e v a c u u
m
i s o n o r s e t t o a u t o
mode
. w h e n s e t t o a u t o
mode,
t h e v a c u u
m
w i l l t u r n
o n
automaticall
y w h e n t h e a p p l i a n c e c o n n e c t e d t o t h e r e c e p t a c l e i s t u r n e d o n .
WARNING
: Improper connection of the equipment grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or service person if you are in doubt as to
whether the outlet is properly grounded. Do not modify the plug provided with the appliance –
if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
IV. Technical data