6. Pour the frothed milk into the espresso prepared, now the cappuccino is ready. Sweeten to taste and if
desired, sprinkle the froth with a little cocoa powder.
7. Press the power switch to cut off the power source.
Note:
we recommend you allow the maker to cool down at least for 5 minutes and press the steam button
to the higher position which is the
“
”
position before making coffee again. Otherwise burnt odor may
occurred in your Espresso coffee .
PRODUCING STEAM TO HEAT LIQUIDS
The steam wand (without the frothing device) can be used to make hot beverages like drinking chocolate,
water or tea.
Method:
1. Remove the detachable tank and fill it with desired water, the water level should not exceed the “MAX”
mark in the tank. Then place the tank into the appliance properly.
2. Then connecting the appliance to power supply source.
3. Press the ON/OFF switch, the power indicator (red) is illuminated.
4.T
urn the knob to the “
” position, make sure the steam button is on the higher position which is the
“
”
position, the pump will pump water, when there is water flowing out, close the pump immediately,
pressing down the steam button to the lower position which is the
“
”
position and waiting for a moment,
the appliance begins to be heated until the yellow lamp is illuminated, it shows the heating is finish.
5. Remove the frothing device from the steam wand.
6. Dip the steam wand into the liquid to be heated. Turn the knob to the
“
”
position.
7. When the required temperature is reached, you can
turn
the knob to the“
” position.
8. Press the power switch to cut off the power source.
AUTOMATICALLY POWER-OFF FUNCTION
1.
After pressing power switch, if there is no any operation within 25 minutes, the unit will power off
automatically.
2.
After pressing power switch, if there is no any operation after pump worked for 3 minutes during
brewing coffee, the unit will power off automatically.
CLEAN AND MAINTENANCE:
