6.
After about one minute, turn the knob to the
“
”
position to stop brewing, you can pour the water in
each container out then clean them thoroughly, now you can start brewing.
PRE-HEATING
To make a cup of good hot Espresso coffee, we recommend you preheating the appliance before
making coffee, including the funnel, filter and cup, so that the coffee flavour can not be influenced by
the cold parts.
1.
Remove the detachable tank and open the tank cover to fill it with desired water, the water level
should not exceed the “MAX” mark in the tank. Then place the tank into the appliance properly.
2.
Set steel mesh into metal funnel, make sure the tube on the funnel aligns with groove in the appliance,
then insert the funnel into the appliance as indicating of “INSERT” mark, and you can fix them into
coffee maker firmly through turn it anticlockwise until it is
fully locked.
3.
Place an espresso cup (yourself cup) on removable drip plate.
4. Then connecting the appliance to power supply source. Make sure the knob is on the
“
”
position.
5.
Press the
ON/OFF
switch, the power indicator (red) will be illuminated, make sure the steam button is
on the higher position which is the
“
”
position. Turn the knob to the “
” position, when there is
water flowing out, close the pump immediately by turning knob again to the “
” position
.
The
purpose of the step is that pump the water of the tank into the housing.
6.
When the ready indicator (blue) is illuminated, you should turn the knob to the “
” position again,
there will be hot water flowing out. When the ready indicator (blue) is extinguished, close the pump by
turning knob again to the “
” position. The pre-heating is finished.
MAKE
ESPRESSO COFFEE
1.
Remove the funnel by turning it in clockwise, .Add ground coffee to steel mesh with coffee spoon, a
spoon ground coffee power can make about a cup of top-grade coffee, then press the ground coffee
powder tightly with the coffee spoon.
2.
Set steel mesh into metal funnel, make sure the tube on the funnel aligns with groove in the appliance,
then insert the funnel into the appliance as indicating of “INSERT” mark, and you can fix them into
coffee maker firmly through turning it anticlockwise until it is at the
“
LOCK
”
position .
3.
Pour out the hot water in the cup. Then place the hot cup (yourself cup) on drip plate.
4. At the time, the ready indicator (blue) is illuminated, once the blue lamp is illuminated, you should
turn the knob to the “
” position, waiting for a moment, there will be coffee flowing out.
Note: During continuous operations, the ready indicator is likely to extinguish due to the inadequate
