11
3. Replaced parts that displayed a safety sign should also
display the current sign.
4. Safety signs are available from your Distributor or the
factory.
How to install Safety Signs:
Be sure that the installation area is clean and
dry.
Remove the smallest portion of the split backing.
Slowly peel back the remaining paper and
carefully smooth the remaining portion of the
sing in place.
Small air pockets can be pierced with a pin and
smoothed out using the piece of sign backing
paper.
Align the sign over the specified area and
carefully press the small portion with the
exposed sticky backing paper.
Decide on the exact position before you remove
the backing paper.
Remove the smallest portion of the split backing
paper.
Align the sing over the specified area and
carefully press the small portion with the
exposed sticky backing in place.
Slowly peel back the remaining paper and
carefully smooth the remaining portion of the
sign in place.
2.10
SIGN-0FF FORM
Crown Construction Equipment follows the general
Safety Standards specified by the Society of Automotive
Engineers (SAE) and the Occupational Safety and Health
Administration (OSHA). Anyone who will be operating
and/or maintaining the Crown Concrete Mixers must
read and clearly understand ALL Safety, Operating and
Maintenance information presented in this manual.
Do not operate or allow anyone else to operate this
equipment until such information has been reviewed.
Annually review this information before the season start-
up.
Make these periodic reviews of SAFETY and OPERATION
a standard practice for all of your equipment. We feel
that an untrained operator is unqualified to operate this
machine.
A sign-off sheet is provided for your record keeping to
show that all personnel who will be working with the
equipment have read and understand the information in
the Operator´s Manual and have been instructed in the
operation of the equipment.
DATE
EMPLOYEES SIGNATURE
EMPLOYERS SIGNATURE
SIGN-OFF
