Crown Boiler FSZ080, Installation Instructions Manual

Page: 5 / 52

3
I Product Description
The FSZ series boiler is a cast iron oil-fired steam boiler designed for use in closed heating systems. This boiler must be
vented by natural draft into a lined masonry or metal chimney, or Type L vent. An adequate supply of air for combustion,
ventilation and dilution of flue gases must be available in the boiler room. This boiler has connections for use with an indirect
domestic water heater.
The FSZ series boilers are not designed for use in process or other “open” steam systems.
taBlE 2.1: GEnEral SPEcIFIcatIOnS
BOILER
MODEL
DIMENSIONS
WATER CONTENT (TO NORMAL
WATER LINE) (GALLONS)
HEAT TRANSFER
SURFACE AREA
(SQ FT)
SHIPPING
WEIGHT
(LBS)
‘A’ ‘B’ ‘C’
WITH TANKLESS
HEATER
NON-HEATER
FSZ080 22-1/4” 24” 6” 15.3 14.9 20.29 607
FSZ100 22-1/4” 24” 6” 15.3 14.9 20.29 607
FSZ130 28-1/4” 30” 6” 19.7 19.3 27.29 744
FSZ160 34-1/4” 36” 7” 24.1 23.8 34.29 881
Maximum working pressure, Steam - 15psi
taBlE 2.2: ratInG Data
BOILER
MODEL
BURNER
INPUT
HEATING
CAPACITY MBH
AHRI NET RATINGS
MINIMUM CHIMNEY
REQUIREMENTS
AFUE
%
GPH MBH
STEAM
MBH
STEAM
SQ. FT.
ROUND
IN. DIA.
RECTANGLE
IN. X IN.
HEIGHT
FT.
FSZ080 0.80 112 97 73 303 6 8 X 8 15 85.7
FSZ100 1.00 140 122 92 381 6 8 X 8 15 86.0
FSZ130 1.30 182 158 119 494 7 8 X 8 15 86.0
FSZ160 1.60 224 195 146 610 7 8 X 8 15 85.9
Burner Capacity Rating, GPH is based on #2 fuel oil with a Gross Heating Value equal to 140,000 BTU/Gal.
AHRI Net Ratings are based on piping and pick-up allowances of 1.333.
taBlE 2.3: tanKlESS HEatEr ratInGS
BOILER MODEL HEATER RATING (GPM) PRESSURE DROP THRU HEATER (PSI)
FSZ080 3.00 22.0
FSZ100 3.25 24.3
FSZ130 3.50 26.5
FSZ160 4.00 31.0
Ratings based on 40F inlet water, 140F outlet water, and 190F boiler water. Ratings are also
based on 5 minute intermittent draws with 10 minutes between draws.
II Specifications