Product Description
The
FW2 MERLIN PRO
is a programmable standalone 2 way wireless transceiver
with a small LCD display for easy programming and status indication.
The unit can accept up to 32 2way wireless detectors and 64 wireless keys, four
wireless units for each one of the outputs.
As soon as a wireless unit is learned into the system, any detection signal from the
unit automatically triggers an output on the
FW2 MERLIN PRO
. This output depends
on which group and zone the device is assigned to.
The
FW2 MERLIN PRO
has eight outputs (output no.8 is a dry contact) that can be
connected to Zone inputs on any wired Control Panel unit, or other suitable device.
The
FW2 MERLIN PRO
is protected with a tamper switch that indicates when its
service cover is opened.
FW2 MERLIN PRO
will also indicate if a tamper switch is
activated on one of the detectors.
Product Features
Full 2 x 16 Character LCD display
Keypad with 4 touches pads for programming.
Scrolling menu
Simple to configure
Can learn up to 32 two way wireless detectors (4 detectors to each output).
Can learn up to 64 wireless keys devices each with 4 separate modes: Toggle,
Pulse 3 Sec, 1 & 2
Password protected access to installer mode
Real Time Clock with back up battery
Tamper protected
Fully supervised
– beeps every minute when detector supervision signal is
missing for more than two hours
Beeps every minute when trouble occur (Low Battery & Tamper alarm)
64 event log (FIFO)
Relay dry contact (Zone 8) operate on a time frame of 60 sec
The left button ◄ disable the buzzer when alarm occurred.
Mute function
– disables the detector detection but report the tamper alarm
continues and clears the current alarms on LCD
2- Way communication advantages
Efficient communication
Communication indication (at device).
Extended range
Events saved at device until acknowledged
Short message burst (battery saving)
Low current technology
Dedicated 24 bit ID
Missing device ping ( supervision)
Encryption option ( AES128 standard)
