Any
Group
already selected displays an
S
in that position.
4.
Press the ▲ or the ▼ buttons select a
Group
.
5.
Press the ◄ button to accept the group selection.
Any
Zone
already selected displays an
S
in that position.
The unit beeps while waiting a tamper signal sent from the selected device.
6. Learn the device in to the system by Opening the detector cover and operating
the tamper switch.
The device is registered and assigned the selected
Group
and
Zone
.
Adding a Remote Control key (Wireless Key)
1. Enter the
Installer
mode.
on page 11 for instructions.
2.
Press the ▼ button to scroll to the
Add Remote
Screen.
3.
Press the ◄ button to confirm.
Toggle will allow you to change the output state (on or off) by a single depression
of the remote key button.
OR
