Crossmatch D SCAN AUTHENTICATOR CF, User Manual

Page: 52 / 72

3-14 D S C A N
®
A U T H E N T I C A T O R C F ™ U s e r M a n u a l v 2 . 1
H o w t o u s e t h e A u t h e n t i c a t o r C F
Workflow settings
In the default workflow, normal ID documents are scanned, including security
checks, for:
• MRZ.
• RFID.
• Selected barcode type(s).
The barcode workflow can be used to demonstrate the reading speed of barcodes.
Only the enabled barcode type(s) will be checked. The more barcode types are
selected the longer the reading process takes.
Barcodes to read
Set the checkmark to read additional barcodes.
Glare reduction mode settings
The glare reduction feature is not supported by all AUTHENTICATOR devices.
Therefore glare reduction is deactivated as the default setting. Before you change
this setting make sure that you install D SCAN Essentials 1.3 or higher.