CCpilot V700
Revision: 1.0
Technical Manual
2020-09-10
www.crosscontrol.com
27
Trademarks and terms of use
© 2020 CrossControl
All trademarks sighted in this document are the property of their respective owners.
-
NXP™ is a trademark of NXP Semiconductors Inc.
-
Arm® is a registered trademark of ARM Limited.
-
Linux® is a registered trademark of Linus Torvalds in the U.S. and other countries.
-
CrossControl and CCpilot are trademarks of CrossControl AB.
CrossControl is not responsible for editing errors, technical errors or for material which has
been omitted in this document. CrossControl is not responsible for unintentional damage or for
damage which occurs as a result of supplying, handling or using of this material including the
devices and software referred to herein. The information in this handbook is supplied without
any guarantees and can change without prior notification.
For CrossControl licensed software, CrossControl grants you a license under CrossControl
intellectual property rights to use, reproduce, distribute, market and sell the software, only as a
part of or integrated within, the devices for which this documentation concerns. Any other
usage, such as, but not limited to, reproduction, distribution, marketing, sales and reverse
engineer of this documentation, licensed software source code or any other affiliated material
may not be performed without written consent of CrossControl.
CrossControl respects the intellectual property of others, and we ask our users to do the same.
Where software based on CrossControl software or products is distributed, the software may
only be distributed in accordance with the terms and conditions provided by the reproduced
licensors.
For end-user license agreements (EULAs), copyright notices, conditions, and disclaimers,
regarding certain third-party components used in the device, refer to the copyright notices
documentation.
