crosscontrol CCpilot V700 Technical Manual Download Page 2

Page: 2 / 27

CCpilot V700

Revision: 1.0

Technical Manual

2020-09-10

www.crosscontrol.com

Introduction

CCpilot V700

is a freely programmable display computer with 7” high brightness full-colour WVGA

TFT with PCAP touch screen. The strong LED backlight in combination with the optically bonded

PCAP, results in excellent sunlight readability.

The powerful i.MX8X ARM® based main CPU and Linux® operating system constitute an open

platform that facilitates the implementation of premium user-machine interaction, reliable controls

and integrated fleet management solutions. In addition, there is one co-processor responsible for

hardware control and supervision.

This technical manual provides important information regarding the product’s hardware and its

basic usage. For software and operating system specifics, please see additional documentation.

Revision history

Rev

Date

Author

Comments

1.0

2020-09-10

FMG

Release Version

Summary of Contents for CCpilot V700




























Search results

Summary of Contents for CCpilot V700

Reviews:

Related manuals for CCpilot V700

Brands by name

Popular brands

crosscontrol CCpilot V700, Technical Manual

Search results

Summary of Contents for CCpilot V700

Reviews:

Related manuals for CCpilot V700

Brands by name

Popular brands