CXM539 User’s Manual
Doc.# 6001-0014 Rev1.2
Page 14
1E-1F
Pacing Value
30-32
A/D Offset Calibration 0 Set When the A/D is Calibrated
33-35
A/D Gain Calibration 0 Set When the A/D is Calibrated
36-38
A/D Offset Calibration 1 Set When the A/D is Calibrated
39-3B
A/D Gain Calibration 1 Set When the A/D is Calibrated
3C-3E
A/D Offset Calibration 2 Set When the A/D is Calibrated
3F-41
A/D Gain Calibration 2 Set When the A/D is Calibrated
42-43
Filter Settings (Set for Data Rate Vs Data Noise)
01- FAST Mode Enabled
02- Skip Mode Enabled
03- Chop Mode Enabled
04- Must Be 0
05-16- 12 bit Sync Filter
6.4
Software Data Correction Equations
Xout = ((((Xin + XOffset) * XScale)/32768)+
((((Yin + YOffset) * YScale)/32768) *
((((Zin + ZOffset) * ZScale)/32768) * ZOrtho))/65536
Yout = ((((Yin + YOffset) * YScale)/32768)+
((((Xin + XOffset) * XScale)/32768) *
((((Zin + ZOffset) * ZScale)/32768) * ZOrtho))/65536
Zout = ((((Zin + ZOffset) * ZScale)/32768)+
((((Xin + XOffset) * XScale)/32768) *
((((Yin + YOffset) * YScale)/32768) * YOrtho))/65536
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:[email protected]
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:[email protected]
