Original User manual
1
Dear customer,
Congratulation for buying your new device from Cross Tools!
Like all our products, this one, too, was developed using the latest technological knowledge. The device was
manufactured and assembled on the basis of state-of-the-art pump technology using most reliable electrical or
electronic components which ensure a high level of quality and a long life of your new product. Please read
through these operating instructions carefully to make sure that you can fully benefit from all features. Some ex-
planatory illustrations can be found at the end of these operating instructions.
We hope you will enjoy your new device!
Please read through these operating instructions carefully and make yourself conversant with the control ele-
ments and the proper use of this product. We shall not be liable in the case of damage caused as a result of the
nonobservance of instructions and provisions of the present operating instructions. Any damage caused as a re-
sult of the nonobservance of the instructions and regulations contained in the present operating instructions shall
not be covered by the warranty terms. Please keep these operating instructions in a safe place and hand them on
together with the device should you ever dispose of it.
List of Contents
1. Device description
1. Transport handle
2. Tank cap
3. Transport hook
4. Valves
5. Engine cover
6. Guide rollers
7. Bottom rollers
8. Exhaust protection grille
9. Socket 400 V (CEE 16)
10. Fuel gauge
11. Oilless protection
12. Ignition key switch
13. Voltmeter
14. Main / changeover switch 230 V~ / 400 V~
15. 3-pole fuse element (400 V)
16. 1-pole fuse (230 V)
17. 1-pole fuse (12 V)
18. Earth connection
19. 12 V connection
20. Socket 230 V (Schuko)
21. 1-pole fuse (12V/30A)
17
Summary of Contents for CPG 6000 DEV
Page 83: ......