-Translation of the original language-
11
14. Installation of water pump: The water pump is
installed lying and should be fixed with the
suction cups on the tank side wall (9) and in
the cable guide (12-1) After installing the
pump, the tank (9) should be pushed to the
end of the frame and locked behind the
plastic splash guard. (Fig.12)
15. Fill the tank (9) with water. Do not add
chemicals or detergents to the water. If the
stopper on the bottom of the water tank is
taken out, the water will drain. It is also
possible to remove the whole water tank from
the tool for emptying out any remaining
water. However, the pump must be removed
for this (see maintenance and cleaning).
16. For the cutting of large tiles, table extensions
(8) can be used. Push the extensions into the
frame from above (Fig. 13-1). For horizontal
adjustment please use the setting screws
(19).
6.2. Disassembly
Please follow steps 1 to 15 in reverse order.
30
