-Translation of the original language-
7
7.
If connections for dust extraction and dust collection devices are provided,
make sure that these are appropriately connected and used.
Using a dust
extraction device can reduce dust risks.
5.4. Use and treatment of the power tool
1.
Do not overload the power tool. Always use the kind of tool most appropriate for
your work.
Using the appropriate tool supports better and safer work within the
indicated performance range.
2.
Do not use power tools with damaged switches.
Power tools that cannot be
switched on and off are dangerous and must be repaired by authorized qualified
personnel.
3.
Pull the mains plug from the socket and/or remove the battery before adjusting
tool settings, changing accessories or putting the tool aside.
These safety
measures prevent an unintentional start of the power tool.
4.
Never store unused power tools within the reach of children. Do not let people
use the tool that are not acquainted with the tool or have not read the manual.
Power tools can be dangerous if used by inexperienced people.
5.
Always treat your power tools with care. Always make sure that moving parts
work correctly without being jammed and that no parts are broken or damaged
in a way that affects the functionality of the power tool. Before using the tool
have damaged parts repaired by authorized qualified personnel
.
Many accidents
are caused by poorly maintained power tools.
6.
Keep the cutting tools sharp and clean.
Carefully maintained cutting tools with
sharp edges tend to jam less and are easier to guide.
7.
Always use power tools, accessories, insert bits etc. in accordance with this
manual. Always take into account the working conditions and the work to be
executed.
The use of power tools for work other than the designated purposes can
lead to dangerous situations.
8. Do not clean plastic parts with solvents. Solvents like gasoline, diluted benzene,
tetrachlormethane, and alcohol might damage plastic parts and lead to cracks. Never
use such solvents for the cleaning of plastic parts. Clean plastic parts with a cloth
moistened with soapy water and carefully dry the parts.
9. Follow instruction for lubricating and changing accessories.
5.5. Maintenance
1.
Power tools may only be maintained and repaired by authorized qualified
personnel. Only original spare parts may be used.
Only this can guarantee safety
in the handling of power tools.
5.6. Further safety instructions
1.
Warning:
The use of accessories or additional equipment other than those mentioned
in this manual can lead to risk of injuries. Only use original spare parts.
2. Keep all protection devices in working order. Never remove or block protection
devices.
3.
Do not leave the tool running without supervision.
Always switch off the tool and
only leave the work area after the tool has come to a complete standstill.
4.
Secure the work piece
. Always use clamping fixtures or a vice to secure the work
piece. This is safer than securing the work piece by hand and allows to operate the
tool with both hands.
26
