Cross Technologies 2083-914A, Instruction Manual

Page: 16 / 18

2.5.7 Alarm Indications
An alarm condition for will occur if any local oscillator phase lock loop (PLL) comes out of lock.
The Mute LED will light if you select Mute and the Remote LED will light when you select the Remote mode.
ON POWER UP
NORMAL DISPLAY
PUSHING MENU/EXECUTE SEQUENCE
REV 1.52
95 > 140 MHz
ATN=00 REF=INT
95 > 140 MHz
SCROLL <>
SCROLL PUSH BUTTON
REMOTE OFF
SCROLL <>
SCROLL PUSH BUTTON
PUSH BUTTON
Power Up
Normal Display
Menu 1 Frequency Translation Mode
Menu 2 140 Center Freq (110 to 170)
Menu 3 Input Level (-20 to -10)
Menu 4 Attenuation (00 to 10)
Menu 5 Mute
Menu 6 Select External 10MHz
Reference
Menu 7 Select Remote Operation
Save? When go to “R” or at end
MUTE OFF
SCROLL <>
SCROLL PUSH BUTTON
ATTN = 00
SCROLL <>
SCROLL PUSH BUTTON
SAVE SETTINGS? Y N
R
R
R
R
R
SCROLL <>
SCROLL PUSH BUTTON
SCROLL <>
SCROLL PUSH BUTTON
IF OUT= 140 MHz
SCROLL <>
SCROLL PUSH BUTTON
R
SCROLL <>
SCROLL PUSH BUTTON
R
OR
IF IN = 140 MHz
EXT REF OFF
SCROLL <>
SCROLL PUSH BUTTON
INLVL = -20 R
FIGURE 2.4 Menu Display and Sequences
2083-914A Manual Page 16 9/27/10