2.5.2 Power On Settings
NOTE:The last status of a unit is retained even when power is removed. When power is restored, the unit will
return to it's previous settings.
When power is first applied, the LCD display goes through three steps.
1.The LCD goes black to show all segments are functioning.
2.The software version will be displayed.
R E V 1 . 0 0
3.The present frequency and gain of the up and downconverter is shown.
U F = 14 5 0 G = + 1 0 . 0
D F = 13 5 0 G = + 2 5 . 0
The unit is now operational and ready for any changes the operator may desire.
2.5.3 Control Switches
1. Menu/Execute - Any change to the programming of the unit must be initiated by pressing the
Menu/Execute switch and completed by pressing the Menu/Execute switch.
2. Horizontal Switch - This switch is mounted so its movement is horizontal and moves the cursor left or
right.
3. Vertical Switch - This switch is mounted so its movement is vertical and has two functions:
a. During frequency, gain, input level changes, the vertical movement will raise or lower the number in
the direction of the arrows.
b. For other functions such as TX MUTE ON/OFF, the vertical switch will alternately turn the function
on or off regardless of the direction operated.
2017-93 Manual, Rev D
Page 15
05/19/10
