NEXUS AM Deactivator
Introduction
v2.1
Page 6 of 26
2.2.2
Software restrictions
The NEXUS AM Deactivator must be tuned with Cross Po
int’s Device Explorer software.
During setup of Device Explorer you are required to specify your dealer code in order to
be able to use the Device Explorer software. If you do not have a dealer code yet then
contact Cross Point to obtain one.
2.2.3
Detection/deactivation distances
The specified detection distances are maximum values. Dependent of environmental
noise these maximum values might not be achieved. See chapter 2.3 for more details on
potential noise sources and installation guidelines.
