ANTENNA
Antenna: for FM reception, the unit is provided with
a FM WIRE ANTENNA, move the wire until the
reception is clear and with no interferences. For
AM reception, the unit is provided with a directional
build-in ferrite antenna. Rotate the set to find the
position in which the best reception is obtained. Do
not connect the EXTERNAL FM ANTENNA to any
outside antenna.
Mute
EQ
5
6
Sleep
Basic Operation
Basic Operation
To listen to a preset station
AM/FM Tuning
Programming Radio Stations
11
Press
TIMER
/
on the remote again to complete
timer on/off setting. Icon
" "
will keep display on
LCD if timer is set.
Note:
The wake up sound level will be increased
gently to preset volume level.
12
Press
TIMER
/
on the remote control to turn
on/off the timer. The icon
" "
will be on/off
respectively.
Sleep mode allows the unit to operate for a pre-set
amount of time, and then automatically turns off.
On the remote control, press
SLEEP
/
repeatedly
to select the desired time period options (in minutes):
-
Display shows in sequence: SLEEP 90, 80, 70,
60, 50, 40, 30, 20, 10
-
Display shows the selected option briefly
and returns to its previous status.
To deactivate the sleep timer, press
SLEEP/
again
to 00 or Press
POWER
/
to switch the unit into
standby mode.
You can temporarily switch off the sound without
switching off the unit.
1
Press
MUTE /
on the remote control to switch
off the sound, playback continues without sound.
2
To switch on the sound , you can:
- press
MUTE
/
again;
- adjust the volume controls;
- change source
Press
EQ
/
on the remote control to select desired
EQ mode.
5 modes preset EQ:
1
Press the
FUNCTION
/
to set the unit to
TUNER mode.
2
Press
STOP/BAND
/
repeatedly to select
your desired waveband. FM or AM
3
Auto Tuning Press and hold
FF/
or
FB /
until stations begin to scan. The unit will
automatically tune to the first available station
with sufficient reception. If a station is received
in stereo, (ST) will show on the display. Repeat
step 3 if necessary until you find your desired
station.
4
Manual Tuning Press
FF/
or
FB /
briefly
and repeatedly until found a station.
You can store up to a total of 40 radio stations
(20 FM and 20 AM) in the memory, manually or
automatically (Autostore)
1
Tune to your desired station
2
Press
PROGRAM
/
to activate programming,
icon MEMORY and P01 will start flashing.
3
Press
/
or
PRESET
/
to
allocate a number from 1 to 20 stations.
4
Press
PROGRAM
/
to confirm, display shows
the preset number waveband and the frequency
of the preset station.
5
Repeat steps 1-4 to store other stations to listen
to a preset station. Press
/
or
PRESET
/
once or more until the desired
preset station in displayed.
Press
/
or
PRESET
/
once or
more until the desired preset station in displayed.
Automatic programming radio stations
Automatic programming will station preset 1, from
this preset number upwards, former programmed
tuner stations will be erased.
1
Press and hold
PROGRAM
/
button
until Auto appears
- Icon memory will start flashing
- Available stations are programmed.
- After all stations are stored, the last preset
station will then be played.
