DO6 Handbook
Jan 2006
63 of 107 pages
8.5.7 CALCulate:LIMit:ACKNowledge?
DESCRIPTION:
Adopts the comparator limits. This command causes those
comparator limits to be adopted that were previously transferred using the two commands
CALCulate:LIMit:LOWer (lower comparator limit) and CALCulate:LIMit:UPPer (upper
comparator limit).
SYNTAX:
CALCulate:LIMit:ACKNowledge
No parameter
QUERY FORM:
Query form only
RESPONSE:
A1
Meaning of response An
NOTE:
Command not allowed in calibration mode.
Command not allowed when measurement is running.
8.5.8 CALCulate:LIMit:CONTrol:DATA
DESCRIPTION:
Sets the number of measurements after Start before evaluation made.
SYNTAX:
CALCulate:LIMit:CONTrol:DATA P1
Meaning of parameter Pn
QUERY FORM:
CALCulate:CONTrol:DATA ?
RESPONSE:
A1
Meaning of response An
Summary of Contents for DO6
Page 7: ...DO6 Handbook Jan 2006 7 of 107 pages 2 5 Block diagram...
Page 56: ...DO6 Handbook Jan 2006 56 of 107 pages 8 2 SPCI registers...
Page 100: ...DO6 Handbook Jan 2006 100 of 107 pages...
Page 101: ...DO6 Handbook Jan 2006 101 of 107 pages 8 16 2 Communication using Fast selection...