
DO6 Handbook
Jan 2006
33 of 107 pages
After pressing ENTER:
Pressing
↑↓
increases or decreases the numerical value, while
→
moves the cursor to the right.
Always enter a 2 digit number leading with zeros. The value for TO NO is entered in the same
way. Example: You copy the PRESENT device program no. 1 to program no. 2 up to no. 7
inclusive. Numbers from 00 to 15 are allowed.
6.5.8 Comparator
The following menu is displayed if the comparator is enabled:
Use
↑↓
to move the selection bar, ENTER to select
Static means that the comparator is reset immediately before the measurement starts. After
pressing STOP the evaluation result (display, PLC, relay if applicable) continues to be available
until START is pressed again.
* With the comparator enabled the optocoupler outputs for < = > are always active, even if the
relay outputs are disabled.
Summary of Contents for DO6
Page 7: ...DO6 Handbook Jan 2006 7 of 107 pages 2 5 Block diagram...
Page 56: ...DO6 Handbook Jan 2006 56 of 107 pages 8 2 SPCI registers...
Page 100: ...DO6 Handbook Jan 2006 100 of 107 pages...
Page 101: ...DO6 Handbook Jan 2006 101 of 107 pages 8 16 2 Communication using Fast selection...