Pg. 8
USING THE HANDLES
!
WARNING: Using the telescoping handle to move the
generator without locking it properly can make movement
unstable, leading to injury or generator damage.
This generator includes two (2) handles. A fixed handle
is located on the rear of the generator, and a telescoping
handle is located on the front of the generator, above the
control panel.
The fixed handle is used for lifting the generator, if needed.
The telescoping handle is used to move the generator
wheelbarrow-style along smooth, even terrain. Always
operate on a level surface.
!
WARNING: For safety reasons, turn off the generator
before moving it. Do not lift generator with telescoping
handle extended
You should also unplug all cords connected to the generator
to prevent a tripping hazard and/or damage to the cords or
receptacles. Ensure that the telescoping handle is properly
stowed and locked when it is not being used to move the
generator.
EXTEND AND LOCK HANDLE
1. Press the unlocking button in the middle of the handle.
2. While the button is pressed, pull the bar outward from
the generator until it is fully extended.
3.
Release the button, locking the handle in place.
RETRACT AND LOCK HANDLE
1. Press the unlocking button in the middle of the handle.
2. While the button is pressed, push the handle straight
into the body of the generator until it bottoms out.
3.
Release the button, locking the handle in place.
