E7
E8
or DOWN
button and release. To advance quickly press
and hold the
UP or DOWN
button.
NOTE:
You can select a desired temperature when
Browning, Sautéing, Roasting and Baking
5. The
Start/Stop button
starts and stops a cooking
program. It must be pressed to change from one
cooking program to another.
6. The
LCD display
shows:
• which cooking program is in use
• how much longer the food needs to cook from
the selected time in hours and minutes once the
appliance is preheated
• the temperature setting selected
• the preheating function
Getting started:
(NOTE: the appliance Beeps as each button is pressed)
1. Press the
Power
button to turn the appliance On.
2. Select a program you would like to use. The options are:
• Brown / Sauté
• Slow Cook
• Roast
• Bake
• Steam
3. The
Start/Stop
button flashes.
4. Select the
Time
and
Temperature
(check appropriate
program on page E9 for time and temperature
availability).
5. Press the
Start/Stop
Button. The word “Preheating” will
flash on the LCD until the appliance is fully heated to the
selected temperature
6. The time selected will disappear while the appliance is
preheating
7. Once preheated, there is an audible signal and the time
will re-appear on the LCD and begin counting down.
There will be an audible signal at the end of the selected
cooking time.
8. If a time has been selected, at the end of the cooking
time the LCD will flash until the
Power
button is
pressed except on Slow Cook when the appliance will
automatically switch to
WARM
which will stay on until
the
Power
button is pressed.
9. To end a cooking program press the
Start/Stop
button
10. To turn off the appliance press the
Power
button.
Remember:
The metal surfaces get very hot. Always use
pot holders when using this appliance. Always lift the lid
away from you to avoid the steam.
11. If additional time is needed when the cooking cycle is
completed, press desired cooking program. Select time.
Press
Start/Stop
and appliance will continue cooking.
To change a Setting:
It’s easy to switch programs during cooking.
Press the
Start/Stop
button (it will flash) and then select
the desired new cooking program. The new program
will be displayed on the LCD. Select the desired time and
temperature. Press the
Start/Stop
button and it becomes
constant and the new program will begin preheating.
HOW TO USE YOUR
MULTI-COOKER (CONT.)
HOW TO USE YOUR
MULTI-COOKER (CONT.)
CKCPSCMC6-033_13EFM1.indd 7-8
5/9/13 11:14 AM