Visit us at
crlaurence.com
for international toll free information 7
A
C.R. LAURENCE CO., INC.
If the electrical cable becomes damaged, it must be replaced with a special electrical cable
available from the manufacturer or the manufacturer's customer service. Dispose of old cables or
plugs immediately after replacing them with new ones. It is dangerous to connect the plug of a loose
cable to a socket.
Replacing cable or plugs
ASSEMBLY AND OPERATION
Fig. 1
The speed can be set (from slow to fast) using the continuous speed adjustment wheel (2).
Switching On:
• Push the switch (1) forward to position 1.
Switching Off:
• Push the switch (1) back to position 0.
Hints for Optimum Use:
• Clamp the workplace. Use a clamping device for small workpieces.
• Draw a line to define the direction in which to guide the accessory.
• Firmly hold the machine by the grip.
• Switch on the machine.
• Wait until the machine has reached full speed.
• Place the accessory on the workpiece.
• Slowly move the machine along the pre-drawn line, firmly pressing the accessory against the
workpiece.
• Do not apply too much pressure on the machine. Let the machine do the work.
• Apply less pressure when the machine starts to vibrate heavily.
• Switch off the machine and wait for the machine to come to a complete standstill before putting
the machine down.
Setting the Speed
Fig. 1
3+4 Sanding Sole and Sanding Paper:
Sanding near edges, corners, and hard-to-reach areas. (Depending on the sanding paper for
sanding of wood, paint, varnish, and stone.)
5. Scraper:
Scraping on solid base. For instance, removal of glue, carpets, and tiles (carpet, flooring).
6. E-cut sawblade:
Separating and deep plunge cuts, for sawing close to edges, in corners, and hard-to-reach areas
(wooden materials, soft materials).
Accessories
AVDB3030_X-tractor 12/29/11 10:20 AM Page 7
