Visit us at
crlaurence.com
for international toll free information 8
A
C.R. LAURENCE CO., INC.
Mounting accessories
For saw blades, scrapers, and disc cutters and cutting discs use the clamping screw in combination
with the retaining ring.
• Remove the clamping screw using an Allen key.
• Replace the tool and tighten it using the clamping screw. Check that the tool is secure in the
chuck and that the machine is correctly secured and supported.
Fitting/replacing sandpaper
Using hook-and-loop fastening system.
• Place the sandpaper in the middle of the sanding disc and press it firmly with your hand.
• Press the sandpaper firmly onto the plate with brief, firm pressure and then switch on the machine.
This ensures that the disc is correctly secured and prevents excessive wear.
• If the sandpaper is worn in a particular spot, you can remove it, turn it 120° and refit it or replace it.
WARNING!
Switch the machine off and unplug the machine before mounting the accessories.
MAINTENANCE
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use. Keep the ventilation
slots free from dust and dirt. If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as gasoline, alcohol, ammonia water, etc. These solvents may damage the
plastic parts.
Cleaning
The machine requires no additional lubrication.
Lubrication
Should a fault occur, e.g. after wear of a part, please contact the service center. In the back of this
manual you find an exploded view showing the parts that can be ordered.
Faults
To prevent damage during transport, the tool is delivered in a solid packaging which consists largely of
reusable material. Therefore please make use of options for recycling the packaging.
Please recycle this product at end of life. Contact your retailer or local authority recycling
center for assistance.
Environment
These machines have been designed to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon proper machine care and regular
cleaning.
AVDB3030_X-tractor 12/29/11 10:20 AM Page 8
