CRL ESK1/ESP1 - ELECTRIC STRIKE KEEPER FOR SINGLE DOORS
05
crlaurence.com | usalum.com
NOT TO SCALE
HEADER PREPARATION
1. Place the header horizontally on the work surface, interior side up.
2. Mark the centerlines and the layout on the header as shown in.
(Fig. 1)
REMOVE HEADER AND PREPARE PER ATTACHED TEMPLATE
INTERIOR
FIG. 1
Drill and Tap
5/16-18 x 3/4" UNC
(2) Places
Centerline of Pivot
4-1/8" (104.8) to Leading Edge-Swing 3 This Side
4-1/8" (104.8) to Leading Edge-Swing 4 This Side
1" (25.4) on 1/2" (12.7) Glass
1/4" (6.4) Centerline for 1/2" (12.7) Glass
1-1/8" (28.6) on 3/4" (19) Glass
3/8" (9.5) Centerline for 3/4" (19) Glass
Face
of
Glass
VIEW SHOWN FROM BELOW
EXTERIOR
R 1/8" (3)
(Typ.)
3"
(76)
3"
(76.2)
13/32"
(10.3)
1-13/32"
(35.7)
1-5/32"
(29.4)
29/32"
(23)
29/32"
(23)
11/16"
(17.5)
1-13/16"
(46)
1-9/32"
(32.5)
6"
(152.4)
3-15/16"
(100)
