6
GB/IE/NI
You should also familiarize yourself with the
local fire protection regulations (e.g. camping
site, tent pitch).
Warning! Danger of suffocation!
If the inside of the tent is not adequately
ventilated, there is a risk of suffocation.
Make sure that the vents on the side of the
inner tent are not covered at any time.
Do not leave children unattended in the tent.
The logo on the inner tent
6
indicates it
is an access slot for USB cables (for LED
lighting or phone charging).
WARNING!
Do not use high voltage
appliances or hot appliances in the
tent, as this may cause fire or electric
shock.
Fire precautions
Camp safely. Follow these
commonsense rules:
Do not place hot appliances near the walls,
roof or curtains.
Always observe the safety instructions for
these appliances.
Never allow children to play near hot
appliances.
Keep exits clear. Do not block the exit with
objects.
Make sure you know the fire precaution
arrangements on the site.
Tent assembly
Inside the carrying bag there is a label with
a QR code. If the QR code is scanned you
will receive details about how to pitch the
product.
Please ensure that the product is only
assembled by people with the appropriate
skills.
Note:
The polyester material of the tent
consists of water-repellent material.
It is possible that during the first rainfall
the tent will not be completely watertight.
However, the threads of the tent will contract
when exposed to water so that after a short
time the tent will become watertight.
Erect the product in accordance with the
illustrations A to F.
Illustration A:
1. Place the outer tent
1
flat on the ground.
The tunnels for the poles
2
3
must be
facing upwards.
2. Fix one side of outer tent
1
in the ground
with the tent pegs
5
, then take hold of the
other end of the tent and pull it apart in such
a way that the outer tent is flat.
3. Push the fiberglass pole
2
3
through the
tunnel guide on the top of outer tent
1
that
it extends evenly on both sides of the tunnel
guide.
Illustration B:
4. Set the tent
1
up and fix the poles to the
metal pins of the floor fastenings.
5. Attach the pole hook to the poles
2
and
3
.
Illustration C:
6. Fix the tent to the ground with the tent
pegs
5
. Secure the outer tent
1
by
tensioning the floor fastenings with the tent
pegs.
7. Now secure the outer tent with guy rope
4
(pre-assembled) and the tent pegs.
Illustration D:
8. Open the entrance, unroll it and attach it with
the two fasteners.
9. Hang the inner tent
6
into the toggles of
the outer tent
1
that are designated for that
purpose.
10. Use the hooks at the corners of inner tent
6
to connect with the outer tent
1
.
11. Repeat steps 9 and 10 to set another inner
tent
6
on the other side of outer tent
1
.
Illustration E:
12. Use the hooks at the corners of the floor
7
to connect with the outer tent
1
.
