Crivit 1-LD4206, Usage And Safety Instructions

Page: 17 / 59

- 31 -
Now the height display will appear
HEIGHT GROESSE TAILLE TAMANO
Set each digit of your height by pressing SEL and confirm each digit by pressing
SET .
Complete the setting procedure by pressing MODE .
Press
SET and SEL simultaneously to totally reset the watch. This is the only way to
change language and the units of measurement.
Important notes on the operation of the heart rate
monitor
The watch has
3 different Modes of Operation.
Press
MODE
to select the mode of operation of the watch.
The order of the modes is as follows:
Stop watch
CHRONO ST-UHR CHRONO CRONO
Heart rate
HRM PULS FC PULSO
Time
TIME ZEIT TEMPS HORA
Each mode of operation may have several
subfeatures
.
The subfeatures can always be accessed by pressing SEL SEL SEL SEL.
- 32 -
Time and basic settings
Press
MODE
to select the feature before proceeding.
TIME
TIME TIME
TIME ZEIT
ZEIT ZEIT
ZEIT TEMPS
TEMPS TEMPS
TEMPS HORA
HORA HORA
HORA
The subfeatures of the time mode can be accessed by pressing
SEL .
Alarm
ALARM ALARM ALARM ALARMA
Timer
TIMER TIMER COMPTE TIMER
Time
TIME ZEIT TEMPS HORA
Press and hold
SET
for 3 seconds to access setting mode.
The display will show
HOLD
TO SET
HALTEN=
EINST.
MAINT=
REGLER MANT=
AJUST
and the 12 or 24 hour selection will blink on the display.
Press
SEL to select a setting and confirm your setting by pressing SET . Set the
seconds, minutes, hours, year, month and day in the same way. Now follow the
instructions in “Setup of the heart rate monitor” to adjust the basic settings.
Exit setting mode by pressing
MODE
.
Second time zone
Press and hold
SEL
for 3 seconds. The watch will switch to the second time zone
display and T2 will appear on the display. The second time zone can be set as
described in “Setup of the heart rate monitor”.
Press and hold
SEL
for 3 seconds to return to normal time mode.